x
Send Your Inquiry Today
Quick Quote
  • led driver 5096 UFO series
  • 5096 UFO dimmer series shell
  • 5096 UFO dimmer series model 2
  • led driver 5096 UFO series
  • 5096 UFO dimmer series shell
  • 5096 UFO dimmer series model 2

5096 Series UFO High Bay Light Led Driver

Features

  • AC Input Range,100-277VAC.
  • Built-in active PFC function.
  • Protection: Short circuit/over temperature .
  • Input/output are connected by cable or coupler.
  • Using DIP switch to achieve different current.
  • 0-10V/1- 10V/10-1V/0-5V/1-5V/PWM dimming function
  • Independently mounted, can be applied to indoor, outdoor.
  • Lifetime of over 50,000 hours, 5-year warranty
  • Certificate:CE, CB, CCC, RoHS, FCC

Where to use this UFO LED Driver?

BA-5096 series ufo led driver is a Non-Isolated driver for UFO High Bay Light. Which can support 100W -300W high bay lights. This series is specially designed for street lamps and tunnel lamps.

It has super high efficiency, THD<10%, compact shell design. It is fully potted with thermal silica gel to ensure heat dissipation and Waterproof performance,with high reliability, high cost performance and so on.

Technical Data

UFO LED Driver 5096FDY SpecificationUFO LED Driver 5096FDY Specification

5096FDY 150W

5096FDY size

Quality Control For UFO High Bay Driver

Raw materials
1

Components's Quality

In order to make sure that each UFO high bay led driver is satisfied, our company has strict requirements on raw material inspection.

Bad quality components will be aging so fast: including resistors, capacitors, diodes, triodes, RF connectors, IC …  Also problem like: short circuit fault, damage, power failure, function failure, electrical parameters not pass, non-smooth invalid and other invalid problems.

2

PCB Quality

PCB quality problems:Including PCB, PCBA poor wetting, burst board, layering, CAF, approach, short circuit fault and a series of ineffective problems.

We are using 1.2 mm thickness PCB , It is no easy to deformed and better to control all components are fixed well on board.

LED driver PCB board
Engineer design
3

UFO High Bay Driver Design

UFO High Bay Driver is composed of electronic components, which are particularly sensitive to temperature. Such as electrolytic capacitors, the life estimation formula of circulating electrolytic capacitors is calculated as “For every 10 degrees drop in temperature, the service life is doubled”, and poor heat dissipation is likely to greatly shorten its service life. Therefore, when planning an LED power supply, great attention should be paid to its own heat conduction. At the beginning of the design, it is necessary to fully consider the heat conduction of the LED and the heat dissipation of the power supply, and control the temperature of the lamp as a whole, so that better lamps can be produced.

4

10KV SPD Test Machine

Being struck by lightning is a common weather phenomenon, and the surge protection generated is a transient wave, which is the surge voltage. It is transmitted along the power line to the power supply route either by other means (transmission thunder) or by magnetic field (induction thunder). Its wave pattern characteristics should first rise rapidly and then slowly decrease. The instantaneous surge protection impact generated by it far exceeds the charge ground stress of general electronic components, which will lead to the destruction of electronic components.

 

10KV surge protection
AUTOMATIC GLUE FILLING MACHINE
5

Automatic Glue Filling Machine

We are using good silicone to do waterproof on UFO high bay led driver.

Silicone is a material with excellent waterproof properties, with the following characteristics: high temperature resistance, weather resistance, corrosion resistance, softness, good insulation properties

But some manufacturers want to save costs, they are filling with polyurethane and quartz sand, which have poor heat dissipation and cracks after aging,It is not easy to find out the difference by appearance.

6

100% Aging Test

There are 3 types of aging tests.

  1. Normal aging. The power supply is directly loaded and energized for aging. If the continuous working time of the power supply is more than one month, there is no failure, no burning phenomenon, and the parameters are stable, it is considered qualified.
  2. Intermittent aging. The power supply is loaded with intermittent energization aging test. When the power supply is under load, it cannot be powered on/off to test the impact resistance of the power supply. If the aging time is more than one month, there is no failure, no burning phenomenon, and the parameters are stable, it is considered qualified.
  3. Accelerate aging. Put the power supply in a high temperature test box and work with load for a long time to check whether its performance is stable.
driver aging

What are the features for UFO LED Driver For High Bay Light?

1. High luminous efficiency

The luminous efficiency of UFO High Bay Lights is above 100 lm/W, and will continue to increase in the future. In the future, it may reach more than 3 times. Industrial and high bay lights are highly efficient. The efficiency of lamps mainly refers to the effective light effect. Industrial high bay lights emit light at 120 degrees, so all the light is effective light.

2. High efficiency

The power efficiency of Beon ufo led drivers is usually as high as 95%. An 18W high bay light only requires 20W of input power. The power factor can also reach above 0.9. Compared with ordinary lamps, it can save more than half of the electricity, which means that an 18-watt high bay light can replace a 36-watt ordinary lamp.

3.Long lifetime

After practical comparison, BEON found that the life of a UFO high bay light can reach 50,000 hours. The life of an ordinary lamp is usually only 5,000 hours. The difference between the two is nearly 10 times.

4. More energy-saving

LED is an energy-saving product, and the efficiency of the ufo led driver must be high. It is particularly important for the structure of ufo led driver installed in the lamp. Because the luminous efficiency of LEDs decreases as the temperature of the LED increases, the heat dissipation of the LED is very important. The efficiency of led driver is high, its power consumption is small, and the heat generated in the lamp is small, which also reduces the temperature rise of the lamp. It is more beneficial to delay the light decay of LED.

These are features for UFO LED Driver For High Bay Light. It can be seen that the UFO high bay light still has more advantages and features than ordinary lamps. In addition to the conventional protection functions, the UFO LED Driver is best to add LED temperature negative feedback in the constant current output to prevent the LED temperature from being too high.

BEON provides constant current waterproof power cores for the global outdoor lighting industry and is a leader in the power supply industry. The main products include LED street light driver, LED floodlight driver, LED tunnel light driver, LED industrial driver, UFO bay light driver, LED wall washer driver, etc.

Popular products (4)

Beon Driver Catalogue

20+ YEARS
Focus on LED Driver Development And Production

Application for UFO High Bay Drivers

supermarket
Supermarkets
Lighting for wearhouse
Wearhouses
train stations-1
Train Stations
Scroll to Top